Olympus FLUOVIEW FV300 - Page 393

APPLIED OPERATIONS/Image Analysis
IV. OPERATION INSTRUCTIONS
IV . 2-279
Page
7. Click the <Annotate> button so that the list of buttons disappears.
8. Click the <Begin Analysis> button. The bird’s eye view of the specified region will
be displayed in the [Intensity Profile] box of the [Analyze] panel.
The [Measurement Results] box in the [Single] sub-panel shows the
measurement results such as the area (Area), horizontal and vertical
lengths ( X/Y, Z or T) and perimeter length (Perimeter) of the region,
and the statistic result of each channel such as the total (Total),
average (Average) and standard deviation (Std Dev).
9. When the image was acquired in the multi-channel mode, the channel(s) to be
subjected to the bird’s eye view display can be selected using the [Channel] option
buttons.
Fig. 2-112 Panel After Analysis (Region Specification)
<Annotate> button
TIP
Shows:
Measurement results
including;
Perimeter
· Area
· X/Y, Z or T
Statistical channel data
including;
· Total
· Average
· Std Dev