APPLIED OPERATIONS/Image Analysis
IV.
OPERATION INSTRUCTIONS
IV .
2-288
Page
8. Click the mouse. A pop-up menu as shown below appears. Select [Properties] from
the menu.
9. The [Properties] dialog box as shown below appears. Display the [Color] panel at
the front.
Fig 2-116 [Properties] Dialog Box
10. Select the desired color from the [Color Palette] list box.
11. It is also possible to specify more than one region simultaneously and display their
operation results together. First specify the regions by repeating steps 7 and 8
above for each. Use different colors for the regions. After having set the regions,
click the mouse in the first region. With the second regions and after, click the
mouse while pressing the Shift
key depressed.
12.
Click the <Annotate> button so that the list of
buttons disappears.
13. Using the scale in the [Threshold] group, set the threshold value for the intensity
values used in operation. The intensity data above the threshold values set here
will be used in the operation.
<Annotate> button
To Next Page
Loading...
