APPLIED OPERATIONS/Merger/Extraction of Image Channels
IV.
OPERATION INSTRUCTIONS
IV .
2-335
Page
When the image in one of the image files is composed of multiple image
slices, it is possible to use only some of the slices by setting a slice range.
See section 2-14-1, “Setting the Range of Multiple Image Slices” for the
operation procedure.
When the images in both image files are composed of multiple image
slices, the overlaid image will have the same number of image slices as the
file with the fewer image slices.
Example 1: XYZ image + XY image = XY image
(The first image slice of the XYZ image is overlaid with the XY image.)
Example 2: XYZ image with 10 slices + XYZ image with 5 slices = XYZ
image with 5 slices
(The first five image slices are overlaid.)
2. Display the [Experiment Editor] sub-panel in the [Process] panel.
Fig. 2-149 [Experiment Editor] Sub-panel
TIP
To Next Page
Loading...
