APPLIED OPERATIONS/Merger/Extraction of Image Channels
IV.
OPERATION INSTRUCTIONS
IV .
2-337
Page
When the image of the second selected image file is
composed of multiple image slices, the setting of the image
slice range is ineffective even when the range is set.
6. Up to 3 channels are selected automatically beginning with the first image set in
the [Experiments in Memory] dialog box, and connected to [Merger] by lines.
The lines of channels are colored as shown below.
Ch1: Navy blue
Ch2: Light blue
Ch3: Green
Ch4: Yellow green
Ch5: Orange
Ch6: Red
When the mouse pointer is approached to the icon-side end of a line
connected to [Merger], the color of the line end turns into yellow.
Clicking the line in this condition switches the channel between the
selected and deselected status alternately. The lines connected to
[Merger] indicate the selected channels.
Up to 6 channels can be selected together.
To select another channel after having selected 6 channels, deselect
the unnecessary channels before selecting required channels.
Clicking a channel line in this area switches
the channel between the selected and
deselected status.
NOTE
NOTE
TIP
NOTE
To Next Page
Loading...
