APPLIED OPERATIONS/Merger/Extraction of Image Channels
IV.
OPERATION INSTRUCTIONS
IV .
2-341
Page
4. From the file list in the [Experiments in Memory] dialog box, select the file name of
the image from which to extract channels and drag it into the frame at the top left.
The icon of the image is displayed in the frame at the top left.
The mouse pointer turns into the image icon during dragging.
5. The channels of the image set in the [Experiments in Memory] dialog box are
connected to [Extract] by lines.
The lines of channels are colored as shown below.
Ch1: Navy blue
Ch2: Light blue
Ch3: Green
Ch4: Yellow green
Ch5:Orange
Ch6: Red
When the mouse pointer is approached to the icon-side end of a line
connected to [Extract], the color of the line end turns into yellow.
Clicking the line in this condition switches the channel between the
selected and deselected status alternately. The lines connected to
[Extract] indicate the selected channels.
Clicking a channel line in this area switches the
channel between the selected and deselected
status.
NOTE
TIP
TIP
To Next Page
Loading...
