Olympus FLUOVIEW FV300 - Page 460

APPLIED OPERATIONS/Changing the Chart Display Method
IV. OPERATION INSTRUCTIONS
IV . 2-346
Page
z [Labels] sub-panel
Used to set the label of the coordinate axis.
z [Ticks] sub-panel
Used to set the coordinate axis line.
Enable or disable the label
display.
Not used with the present
application.
Set the label character font.
Set the distance from the title
to the label display position.
Set the distance between
labels.
Set the angle of label
display.
Set the label display format.
Set the type, color and width
of the coordinate axis.
Set the type, color and width
of the scale line on the label
side of the coordinate axis.
Set the type, color and width
of the line along the label.
Enable or disable the display
of coordinate axis scales in
the intermediate position
between labels.
Set the length of the scale
line from the coordinate axis
to the label.
Enable or disable the display
of scale line in the positions
where labels are displayed.
Set the type, color and width
of the scale line on the chart
side of the coordinate axis.
Set the length of the scale
line from the coordinate axis
to the chart side.
Set the type, color and width
of the scale line between
labels.
Set the length from the
coordinate axis of the scale
line between labels to that on
the label side.
Set the number of division
between labels.
Enable or disable the scale
display according to the
maximum and minimum
values in the chart.
Enable or disable the
label display on a point
of crossing with another
axis.
Set the label type.
Select [Auto] or [None].