Olympus FLUOVIEW FV300 - Page 462

APPLIED OPERATIONS/Changing the Chart Display Method
IV. OPERATION INSTRUCTIONS
IV . 2-348
Page
z [Legend] sub-panel
Used to set the chart legend display.
z [Panel] sub-panel
Used to set the chart display panel.
Enable or disable the legend
display.
Set the legend background
color.
Set the legend character font.
Set whether or not the chart is
resized according to the legend
display.
Set the type, color and width of
the legend frame line.
Set the legend display
style.
This setting is effective
when the numerical value
display is selected in the
[Legend Style] pull-down
menu.
Fine-adjust the positioning
of the legend display from
the top edge.
Set the width of the lines
displayed in the legend
column.
Set the type, color and
width of the lines dividing
the legend items.
Set the legend display position
and the margin between the
chart display area and legend
display area.
Set the color and width of the
shadow area of the shadowed
display of legend area.
Enables or disables the
inversion of the display order
of legend items.
Set the format of the borders
of the chart display area.
[Bevel Inner] sets the inner
borders of the chart display
area and [Bevel Outer] sets
the outer borders of the chart
display area.
Sets the width between the
inner and outer borders.
Sets the width of the inner
and outer borders.
Specifies the background
image of the chart display
area, sets whether it is
displayed inside the chart or
in the entire chart display
area, and sets its display
position.
Set the background
color of the chart display
area.
Enable or disable the
display outside the outer
frame of the chart
dis
p
la
y
area.
Set whether or not the
chart display area
background is displayed
with gradations, and sets
the colors and type o
f
the background.
Set the items to be
displayed in the legend.
Usually set [Automatic].