Olympus FLUOVIEW FV300 - Page 464

APPLIED OPERATIONS/Changing the Chart Display Method
IV. OPERATION INSTRUCTIONS
IV . 2-350
Page
z [3D] sub-panel
Used to set the 3D display.
Switches between the 3D
and 2D chart display.
Sets the 3D chart display
effect by varying the angle.
Enables or disables the 3D
display in the depth-wise
direction.
Enables or disables the
zooming display of character
strings in the chart, such as
label characters, together
with the chart display.
Change the zoom ratio.
Rotates the chart in the
vertical direction with respect
to the bottom side.
Moves the chart display
position in the horizontal
direction.
Moves the chart display
position in the vertical
direction.
Distorts the chart to change
the display effect.
Rotates the chart in the
horizontal direction with
respect to the bottom side.