Appendix D Formatting of Magnetic Optical Disk
IV.
OPERATION INSTRUCTIONS
IV .
D-2
Page
4. From the [Partition] menu of the [Disk Administrator] window, select the [Create] command. The dialog box
as shown below appears.
5. Set the value of the [Create partition of size] edit box in the [Create Primary Partition] dialog box to
“Maximum size”, and click the <OK> button.
6. From the [Partition] menu of the [Disk Administrator] window, select the [Commit Change know] command.
7. When the confirmation message as shown is displayed, click the <Yes> button.
8. When the following message is displayed, click the <OK> button.
9. In the [Disk Administrator] window, select the MO disk drive.
Click
To Next Page
Loading...
