Software Setup/Setting the System Configuration
V .
MAINTENANCE
V.
1-9
Page
6. Click the [Fluorescence] icon in [User Settings] to display the [Fluorescent
Deys/Colors panel in the front position.
In this panel, select the items to be included in the list of dyes used by the
FLUOVIEW application. (Each user should set the dyes that the user wants to
use with FLUOVIEW.)
The setting procedure is similar to the objective setting procedure ([Objectives]
panel).
7. Click the [Coloring Tables] icon in [User Settings] to display the [Coloring Tables]
panel in the front position.
In this panel, select the characters to be displayed in each of the 8 buttons
displayed in the [Color Tool] dialog box of the FLUOVIEW application and the
LUT file to be read out when the button is pressed.
List of dyes that can
be used during
FLUOVIEW
operation
List of all dyes
available at present
[Fluorescence] icon
[Coloring Tables] icon
To Next Page
Loading...
