201
Camera Control Window
Camera Control Window
The camera control window is used while the camera is connected to the computer
by USB or IEEE1394 (FireWire) cable. The camera control window can only be
used to operate Olympus E-1 and E-300 cameras.
In the camera control window, PC Master mode or Camera Master mode can be
used to shoot images. The features of both modes are described below.
z PC Master mode
• Images are shot by clicking the [AF Shooting] and [Shooting] buttons in the camera
control window.
• Shot images are then saved directly to the computer. You can save only those
images you want to keep after previewing.
• This window can also be used to configure the camera settings.
z Camera Master mode
• Images are shot by pressing the shutter button on the camera.
• Shot images are then saved directly to the computer.
• The camera settings are configured from the camera.
To Next Page
Loading...
Need help?
General
