34
Browse Window
Images can be transferred from the camera or media to the computer. This is done
by using the [Transfer Images] dialog box in the browse window.
The following describes how to transfer images from the camera and media.
[Transfer Images] dialog box
The [Transfer Images] dialog box is used to configure the settings when
transferring images from the camera or media.
Transferring images
[Transfer Images] dialog box
Item Description
Transfer Source
Camera The transfer source is set to [Camera]. If several cameras are
connected, select the desired source camera ID from the pull-
down list on the right.
Media The transfer source is set to [Media]. If several media are
inserted in the computer, select the desired source media from
the pull-down list on the right.
Folder Tree Displays the tree of the transfer source camera or media. You
can select the image transfer source from the folder tree.
Select All Images Check this box to specify all images displayed in the thumbnail
display area.
Automatically delete
image after
transferring
Check this box to automatically delete images from the transfer
source after the images have been transferred to the computer.
Number of images
and file size
Displays the total number and file size of the images selected
in the thumbnail display area.
To Next Page
Loading...