Camera settings
243
Camera Control Window
2 Select the file name from the [Saved Setting] pull-down list in the
camera control window or [Shooting Setup / Camera Setup]
dialog box.
[Saved Setting] pull-down list in the [Shooting Setup / Camera Setup] dialog
box
Saved Setting Description
Default Settings Indicates that no settings have been read. [Default Settings]
is displayed when the camera control window starts, and
the camera settings at startup are displayed in the setting
items. These are the factory default settings.
(Names of settings
files)
The names of the settings files saved in the same folder are
displayed in a pull-down list. When a file is selected, the
settings are read and applied to the setting items.
Browse Use this to open a settings file in another folder. When
[Browse] is selected, the [Open] dialog box appears. When
a file name is selected, the settings are read and applied to
the setting items.
• If the model of camera to which the setting file is applied is different from the
model of camera used when saving the setting file, an error message appears
and the settings are not changed.
Note
To Next Page
Loading...
Need help?
General
