Olympus Studio - Using the image processing bar

Editing images
153
Image Edit Window
Using the image processing bar
The image processing bar appears when the image edit window starts. To edit an
image, click an editing item on the image processing bar and then use the
displayed image processing palette.
1 Click the button on the image processing bar that corresponds
to the item you want to edit.
The image processing palette appears.
Image processing bar Image processing palette
Item Description
[Batch Target]
Batch processing can be used to edit the images in several
files or folders at the same time. Check this box to enable
batch processing.
This box cannot be checked if [Apply] is not also checked in
each image processing palette.
“Batch Processing” P.182
[Apply]
Check this box to apply the setting of the image processing
palette to the image.
Uncheck this box to cancel the setting of the image processing
palette.
This box can be checked (or unchecked) to link with the [Apply]
checkbox on each image processing palette.