Shooting images
221
Camera Control Window
1 Click the [File Naming Rule] button.
The [File Naming Rule] dialog box appears.
2 Configure the naming rule.
Configure the [Prefix], [Base], and [Suffix] blocks of the naming rule.
If [Optional String] is selected, enter the optional string in the box displayed at the
bottom or select the optional string from the pull-down list.
If [Shooting Date] or [Shooting Date & Time] is selected, select from the pull-down
list displayed at the bottom.
If [Serial Number] is selected, select the number of digits.
Also, enter separator characters between the blocks as needed.
3 Click the [OK] button.
The naming rule is set.
[File Naming Rule] dialog box
Item Description
F (separator characters) Enter separator characters for each block. If nothing is
entered, no separator characters will be used.
(Optional string setting
box)
Displayed when [Optional String] is selected for each
block. Enter a string or select a previously entered string
from the pull-down list.
(Shooting date setting
box)
Displayed when [Shooting Date] is selected for each
block. Select the shooting date format from the pull-down
list.
(Shooting date/time
setting box)
Displayed when [Shooting Date & Time] is selected for
each block. Select the shooting date/time format from the
pull-down list.
Digits Displayed when [Serial Number] is selected for each
block. Enter the number of digits of the serial number. You
can enter up to four digits.
[Cancel] Cancels the setting of the naming rule.
[OK] Sets the naming convention for the image files.
To Next Page
Loading...