Time lapse photography
246
Camera Control Window
• The [Shooting Interval] and [Exit conditions] settings cannot be changed during
time lapse photography. The camera settings also cannot be changed.
• If [Shooting Interval] is set to an extremely short interval, you may not be able
to shoot images at the set interval. Instead, images may be shot at the closest
possible interval.
• If there is insufficient available space in the hard disk during time lapse
photography, an error message appears and time lapse photography is
cancelled.
• If the camera is connected to the computer, the camera will not enter sleep
mode when the selected [Sleep] time on [Custom Menu] is reached.
• When using time lapse photography, the focus mode automatically changes to
release priority.
Note
To Next Page
Loading...