OM SYSTEM OM-5 - Page 173

Role Function
UView Selection (U)
(display selection)
Switch between viewfinder photography and live view. If [Off] is
select
ed for [EVF Auto Switch] in CCustom MenuI (P. 293), the
display will switch between the viewfinder and the monitor. Press and
hold the control to display [EVF Auto Switch] options.
S-OVF (s)
(Konly)
Press the control once to select [On] for [S-OVF] in CCust
om
Menu
I (P. 293) and again to select [Off].
AF Limiter (AF Limit)
(Konly)
Press the control once to enable [AF Limiter] (
P. 312) and again to
disable. Hold the button and rotate the front or rear dial to choose
from three stored settings.
Preset MF (Pr
eMF
)
Toggle [AF Mode]> [Pr
eset MF]
on or off (P. 122). Press the control
once to enable preset MF and again to restore the previous focus
mode. Alternatively, you can choose the [AF Mode] by holding the
control and rotating a dial.
This option will have no effect during still photography if [mode2] is
selected for [KFn Lever Function] (P. 321).
It will likewise have no effect during movie recording if [mode2] is
selected for [nButton/Dial/Lever]> [nFn Lever Function] in
the nVideo Menu (P. 233).
Lens Info Settings
(0Lens)
Recall previously-saved lens data (P
. 348
). This can be used to recall
saved data for the current lens after changing lenses or the like.
IS Mode (IS)
Press the control once to select [Off] for [Image S
tabilizer] and
again to turn image stabilization on (P. 134). Hold the control and
rotate the front or rear dial to access [Image Stabilizer] options.
Flicker Scan (o)
Press the control once to turn flicker scan on (P. 343, P. 240). You can
adjust shutter speed for best results while viewing banding in the
display. Press the control again to display shooting information and
access other settings. Press and hold the control to select [Off] for
[Flicker Scan].
Live ND Shooting (O)
(Konly)
Press the control once to enable [Live ND Shooting] (P. 213), again
to disable. Hold the button and rotate the front or rear dial to
choose a setting for [ND Number].
173
Assigning functions to buttons (Button Function)