When [Select] is chosen for [Pow
er-off Standby], a confirmation
dialog will be displayed before the camera turns off if all the
following conditions are met:
[On] is selected for [Wireless Functions],
the camera and smartphone are paired (P. 359), and
the memory card is correctly inserted.
Set
Power-off Standby
Yes
No
Activate W
i-Fi/Bluetooth Power-off
Standby so images can be imported
while power is off?
Select
Yes Turn the camera off but leave the wireless smartphone connection active.
No Turn the camera off and terminate the wireless smartphone connection.
If no operations are performed about a minute after the confirmation dialog is displayed, the
camera will end the wireless connection t
o the smartphone and turn off automatically.
If left active, the wireless connection will automatically terminate if:
the connection remains inactive for 12 hours,
the memory card is removed,
the battery is replaced, or
a charging error occurs during on-board battery charging.
The connection can be restored by turning the camera on.
Note that if [On] is selected for [Power-off Standby], camera may not turn on immediately when
the ON/OFF lever is rotated to ON.
363
Wireless Settings for When the Camera Is Off
C
C
-
-
-
-
B
To Next Page
Loading...
