OM SYSTEM OM-5 - Choosing Aperture and Shutter Speed ( Manual Exposure)

Rotate the mode dial to M.
The display shows the difference between the exposure
produced by the select
ed aperture and shutter speed and
the optimal exposure metered by the camera. The display
will flash if the difference exceeds ±3EV.
1023
1:02:03
M
S-IS AUTOS-IS AUTO
250 F5.6
-2.0
30
p
30
p
4K
YFYFYFYF
ISO-A
200
1
Difference from optimal
exposure
1
Choosing aperture and shutter speed (M:
Manual Exposure)
In this mode, y
ou choose the aperture and shutter speed. You can adjust settings according to
your goals, for example by combining fast shutter speeds with small apertures (high f/-numbers) for
increased depth of field.
Adjust aperture and shutter speed.
Use the front and rear dials to adjust the following settings.
Front dial: Aperture
Rear dial: Shutter speed
Shutter speed can be set to values between 1/8000 and 60s.
Shutter speeds as fast as 1/32000s are available in silent mode. g“Shooting without
shutter sound (Silent I)” (P. 106)
When [AUTO] is selected for [KISO], ISO sensitivity will automatically be adjusted
for optimal exposure at the selected exposure settings. [KISO] defaults to [AUTO].
g“Changing ISO sensitivity (ISO)” (P. 98)
Take pictures.
55
Choosing aperture and shutter speed (M: Manual
Exposur
e)
1.
2.
3.