OM SYSTEM OM-5 User Manual

Sleep Mode
If no controls ar
e used for a set period, the camera will automatically enter suspend operation to
reduce the drain on the batteries. This is referred to as “sleep mode”.
When the camera enters sleep mode, the monitor will turn off and operation will be suspended.
Pressing the shutter or q button reactivates the camera.
If no operations are performed for a set period after the camera enters sleep mode, the camera will
turn off automatically. The camera can be reactivated by turning it on again.
The camera may require additional time to recover from sleep mode when [On] (enabled) is
selected for [Wi-Fi/Bluetooth Settings] > [Power-off Standby]. g “Wireless Settings for When
the Camera Is Off” (P. 362)
The delay before the camera goes to sleep or turns off automatically can be selected in the
CCustom Menu. At default settings, the camera will go to sleep after one minute and turn off
automatically after four hours. gCCustom Menu s> [Sleep], [Auto Power Off] (P. 296)
33
Turning the camera on
C
C

OM SYSTEM OM-5 Specifications

General

Sensor Type	Live MOS
Effective Pixels	20.4MP
Image Processor	TruePic IX
Viewfinder Resolution	2.36 million dots
LCD Screen Size	3.0 inches
LCD Screen Resolution	1.04 million dots
Shutter Speed	1/8000 to 60 sec
Dimensions	125.3 x 85.2 x 49.7 mm
Weight	414 g (body only)
Connectivity	Wi-Fi, Bluetooth
Memory Card Slot	1 x SD/SDHC/SDXC (UHS-II compatible)
Sensor Size	17.3 x 13 mm (Micro Four Thirds)
ISO Sensitivity	ISO 200-25600 (expandable to ISO 64)
Autofocus Points	121 points
Viewfinder Type	Electronic
LCD Screen Type	Tilting Touchscreen
Video Recording	4K UHD at 30p
Continuous Shooting	10 fps (mechanical shutter), 30 fps (electronic shutter)
Image Stabilization	5-axis sensor-shift
Weather Sealing	Yes
Battery Type	BLS-50 Lithium-Ion battery
Battery Life	Approx. 310 shots
Autofocus System	Contrast Detection AF