OM SYSTEM OM-5 - Setting Anti-Shock;Silent Shooting (Anti-Shock H;Silent I )

Setting anti-shock/silent shooting (Anti-Shock
H/Silent I)
Enabling anti-shock (P
. 105
) or silent (P. 106) shooting settings gives you a choice of options for
reducing vibration or camera noise while taking photographs in sequential shooting or self-timer
modes (P. 101).
Select [Anti-ShockH/Silent I] in 7Shooting Menu2 and press the OK button.
Highlight an item using FG and press the I button.
Highlight an option using the FG buttons.
Anti-Shock H
Choose the delay between the shutter button being pressed all the way
down and the shutt
er being r
eleased in anti-shock mode. Use this mode
to suppress small vibrations caused by the operation of the shutter. Anti-
shock mode is available in both sequential shooting and self-timer modes
(P. 101). Select [Off] to disable anti-shock mode when it is not in use.
Silent I
Choose the delay between the shutter button being pressed all the way
down and the shutter being released in silent mode. Use this option
in settings in which the sound of the shutter would be unwelcome.
Silent mode is available in both sequential shooting and self-timer modes
(P. 101). Select [Off] to disable silent mode when it is not in use.
Noise
Reduction I
Select
[Auto] t
o reduce image “noise” in long exposures during silent
photography. The sound of the shutter may be audible when noise
reduction is active.
Silent I Mode
Settings
Choose whether to enable [o], [AF Illuminator], or [Flash Mode] in
silent mode.
Select
[Allow] to use current settings for the selected item, [Not Allow]
to ignore current settings and disable the selected item.
Press the OK button.
232
Setting anti-shock/silent shooting (Anti-Shock
H/Silent I)
1.
2.
3.
4.