OM SYSTEM OM-5 - Enabling AF-Target Selection Wrap ( Loop Settings)

[Loop 1]: If you continue t
o press the
FGHI buttons in the same direction
after reaching the border of the display, the
target in the same row or column on the
opposite border will be selected.
“Loop 1”
[Loop 2]: If you continue t
o press the
FGHI buttons in the same direction
after reaching the border of the display, the
target in the next row or column on the
opposite border will be selected.
“Loop 2”
Enabling AF-Target Selection Wrap (YLoop
Settings)
MENU Q C Q b Q [Y Loop Settings]
You can choose whether AF-tar
get selection “wraps around” the edges of the display. You can also
choose whether you have the option of selecting q (all targets) before AF-target selection “wraps
around” to the opposite border of the display.
YLoop
Selection
[Off]: Wrap disabled. Target selection stays within the borders of the display.
Via q
[No]: T
arget selection does not pass through q
(all targets) before wrapping
around.
[Yes]: If [Loop 1] or [Loop 2] is chosen for [YLoop Selection], target
selection will pass through q (all targets) before wrapping around to the
opposite border.
Hiding q (all targets) in [KYMode Settings] fixes [Via q] at
[No].
[Y Loop Selection] is fix
ed at
[Off] during movie recording and when [RAF] or [RAFJ] is
selected for focus mode.
308
Enabling AF-Target Selection Wrap (YLoop
Settings)
C
C