OM SYSTEM OM-5 - Attaching and Removing Lenses; Attaching a Lens to the Camera

Confirm that the ON/OFF lever is in the OFF position.
Remove the rear cap of the
lens and the body cap of the
camera.
2
1
2
1
Align the lens attachment mark (red) on the camera with the
alignment mark (red) on the lens, then inser
t the lens into the
camera’s body.
1
Lens attachment mark
1
Rotate the lens clockwise until it clicks into place.
Do not pr
ess the lens r
elease button.
Do not touch internal portions of the camera.
C
C
Attaching and removing lenses
Attaching a lens t
o the camera
For information on interchangeable lenses, see “Interchangeable lenses” (P. 428).
29
Attaching and removing lenses
1.
2.
3.
4.