OM SYSTEM OM-5 - Switching between Displays

Framing photos in the monitor
1
Monitor
P
S-IS AUTOS-IS AUTO
250 F5.6
0.0
30
p
30
p
4K
YFYF
1023
1:02:03
ISO-A
200
Live view is displayed on the monitor.
1
Framing photos in the viewfinder
2
Viewfinder
1023
1:02:03
P
250 F5.6
S-IS AUTOS-IS AUTO
30p
4K
0.0
YFYF
ISO-A
200
The viewfinder turns on automatically when you
bring it to your eye. When the viewfinder is lit up,
the monitor turns off.
2
If the viewfinder is not in focus, put your eye to the viewfinder
and focus the display by rotating the diopter adjustment dial.
1
2
U (LV) butt
on
Diopter adjustment dial
1
2
Switching between displays
The camera uses an eye sensor t
o automatically switch between the monitor and viewfinder displays.
The monitor live view display and viewfinder also show information on camera settings. Options are
available for controlling display switching and choosing the information shown.
Pressing the U (LV) button switches the display in the monitor from live view to the super control
panel. Putting your eye to viewfinder displays the view through the lens. The monitor turns off.
Shooting information can be viewed by pressing the INFO button when the super control panel is
displayed (P. 41).
Display switching and viewfinder display options are available in the camera menus.
gCCustom Menu I> [EVF Auto Switch], [EVF Style] (P. 293)
40
Switching between displays
B