OM SYSTEM OM-5 User Manual

1
3
4
2
Type A HDMI connector
HDMI cable
Type D HDMI connect
or
Camera HDMI connector
1
2
3
4
Connecting the Camera to a TV
Connect the camera using an HDMI cable.
Aft
er confirming that the camera is off, connect it to the TV using an HDMI cable.
Switch the TV to HDMI input and turn the camera on.
The TV will show the contents of the camera monitor. Press the q button to view pictures.
If [On] is selected for [HDMI Control] (P. 388), the camera monitor will turn off when an HDMI
cable is connected.
For information on switching to HDMI input, see the manual provided with the TV.
Depending on TV settings, the image may be cropped and some indicators may not be visible.
HDMI cannot be used while the camera is connected to a computer via USB.
If [Record Mode] is selected for [nHDMI Output]> [Output Mode] in the nVideo
Menu (P. 233), the signal will be output at the current movie frame size. No image will be displayed
if the TV does not support the selected frame size. [4K] and [C4K] cannot be selected for [nX].
The output format used when [4K] or [C4K] is selected in photo mode is 1080p priority.
387
Viewing Pictures on a TV (HDMI)
1.
2.

OM SYSTEM OM-5 Specifications

General

Sensor Type	Live MOS
Effective Pixels	20.4MP
Image Processor	TruePic IX
Viewfinder Resolution	2.36 million dots
LCD Screen Size	3.0 inches
LCD Screen Resolution	1.04 million dots
Shutter Speed	1/8000 to 60 sec
Dimensions	125.3 x 85.2 x 49.7 mm
Weight	414 g (body only)
Connectivity	Wi-Fi, Bluetooth
Memory Card Slot	1 x SD/SDHC/SDXC (UHS-II compatible)
Sensor Size	17.3 x 13 mm (Micro Four Thirds)
ISO Sensitivity	ISO 200-25600 (expandable to ISO 64)
Autofocus Points	121 points
Viewfinder Type	Electronic
LCD Screen Type	Tilting Touchscreen
Video Recording	4K UHD at 30p
Continuous Shooting	10 fps (mechanical shutter), 30 fps (electronic shutter)
Image Stabilization	5-axis sensor-shift
Weather Sealing	Yes
Battery Type	BLS-50 Lithium-Ion battery
Battery Life	Approx. 310 shots
Autofocus System	Contrast Detection AF