EasyManuals Logo

OM SYSTEM OM-5 User Manual

OM SYSTEM OM-5
467 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
Changing ISO sensitivity (ISO)
Select a value accor
ding to subject brightness. Higher values let you photograph darker scenes but
also increase image “noise” (mottling). Select [AUTO] to let the camera adjust sensitivity according to
lighting conditions.
ISO sensitivity is fixed at [AUTO] during movie recording when [P], [A], or [S] is selected for
[nMode] (movie exposure mode). Setting [nMode] to [M] allows other options to be selected.
Press the ISO button, and rotate the front or rear dial to select a value.
AUTO
Sensitivity is adjusted automatically according to shooting
conditions.
Use [KISO-Auto Set]
in CCustom Menum (P. 284) to choose
the maximum sensitivity selected by the camera and the shutter
speed at which auto sensitivity control takes effect during still
photography.
During movie recording, ISO sensitivity will be set to values of from
ISO 200 to 6400. You can also choose maximum and standard
values for ISO sensitivity.
L64, L100, 200–25600
(still photography)
Choose a v
alue for ISO sensitivity. ISO 200 offers a good balance
between noise and dynamic range. Choose [L100] or [L64] for
larger apertures (lower f-numbers) or slower shutter speeds. [L64] is
equivalent to ISO 64, [L100] to ISO 100.
[L64] and [L100] are available at all exposure step values.
[L64] and [L100] reduce dynamic range.
200–6400
(movie recor
ding)
Choose a value for [nISO]. ISO 200 offers a good balance
between noise and dynamic range. This option is available when
[M] is selected for [nMode] (movie exposure mode).
Combining [KISO] v
alues ov
er ISO 8000 with settings that use an electronic shutter (for example,
silent mode or focus bracketing) sets the flash sync speed to 1/20s.
Regardless of the value selected for ISO sensitivity, the flash sync speed for photos taken using ISO
bracketing in silent mode is 1/20s.
When [M] is selected for [nMode] (movie exposure mode), ISO sensitivity can be adjusted during
recording using touch controls (P. 84) or by rotating the front or rear dial.
98
Changing ISO sensitivity (ISO)
1.
C
C
C

Table of Contents

Other manuals for OM SYSTEM OM-5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the OM SYSTEM OM-5 and is the answer not in the manual?

OM SYSTEM OM-5 Specifications

General IconGeneral
Sensor TypeLive MOS
Effective Pixels20.4MP
Image ProcessorTruePic IX
Viewfinder Resolution2.36 million dots
LCD Screen Size3.0 inches
LCD Screen Resolution1.04 million dots
Shutter Speed1/8000 to 60 sec
Dimensions125.3 x 85.2 x 49.7 mm
Weight414 g (body only)
ConnectivityWi-Fi, Bluetooth
Memory Card Slot1 x SD/SDHC/SDXC (UHS-II compatible)
Sensor Size17.3 x 13 mm (Micro Four Thirds)
ISO SensitivityISO 200-25600 (expandable to ISO 64)
Autofocus Points121 points
Viewfinder TypeElectronic
LCD Screen TypeTilting Touchscreen
Video Recording4K UHD at 30p
Continuous Shooting10 fps (mechanical shutter), 30 fps (electronic shutter)
Image Stabilization5-axis sensor-shift
Weather SealingYes
Battery TypeBLS-50 Lithium-Ion battery
Battery LifeApprox. 310 shots
Autofocus SystemContrast Detection AF

Related product manuals