Adjust the size of the zoom frame to choose the zoom ratio.
Press the
INFO button and then use the FG buttons or
the front or rear dial to adjust the size of the zoom frame.
Press the button to which [8] is assigned once more.
The camera will zoom the select
ed area in to fill the display.
Use the front or rear dial to zoom in or out.
Use the FGHI buttons to scroll the display.
In shooting mode M (manual) or B (bulb), you can pr
ess
the INFO button during zoom to choose aperture or shutter
speed.
Exposure adjustment display
for modes M and B
Press the OK button t
o accept and exit.
Press the 8 button to return to the zoom frame.
Press the OK button to end focus zoom.
You can also end focus zoom by pressing and holding the 8 button.
Press the shutter button halfway to focus using autofocus.
Focus zoom applies to the display only. Pictures taken with the camera are not affected.
Touch controls can be used for focus zoom. g“Shooting with touch screen operations” (P. 46)
You can make the area in the zoom frame brighter for easier focus or configure the camera to exit
focus zoom when the shutter button is pressed halfway to focus. gCCustom Menu j> [LV
Close Up Settings] (P. 280)
97
Zoom frame AF/Zoom AF (Super Spot AF)
3.
4.
5.
C
B
B