OM SYSTEM OM-5 - Viewing Pictures on a TV (HDMI); HDMI Output

Viewing Pictures on a TV (HDMI)
Photos and movies can be view
ed on a high-definition TV connected directly to the camera by means
of an HDMI cable. A remote control can be used to operate the display while it is connected to the
camera.
HDMI Output
Choose the signal output to the HDMI device. You can adjust movie frame size and frame rate to
match TV specifications and the video standards supported in your country or region. Match output
settings to the input settings on the TV.
Output Size
The format for the video signal output via the HDMI connector can be chosen from
the options below.
[C4K]: 4K Digital Cinema (4096× 2160)
[4K]: 4K (3840× 2160) priority
[1080p]: Full High Definition (1080p) priority
[720p]: High Definition (720p) priority
[480p/576p]: 480p/576p
HDMI
Control
The t
elevision remote control can be used to operate the camera in playback mode
(P. 388). Choose from [Off] and [On]. When [On] is selected, the camera can be
used for playback only.
Output
Frame Rate
Choose a frame rate for the signal output via the HDMI connector according to
whether the television supports NTSC (60p) or PAL (50p).
[HDMI Control] and [Output Frame Rate] settings cannot be changed while the camera is
connected to another device via HDMI.
Audio can be output only on devices that support the audio format selected with the camera.
The options available via [HDMI Control] vary with the device connected. See the device manual
for details.
Press the MENU button to view the menus.
385
Viewing Pictures on a TV (HDMI)
1.