OM SYSTEM OM-5 - Adjusting Zoom During Filming (Movie )

Press the button to which [Movie A] is assigned.
A frame will appear in the center of the display.
M-ISM-IS
1
1:02:03
n
LL
R
R
C-AF
TC 00:00:00:00 DF
0.0
250 F5.6
ISO-A
200
60
p
60
p
FHD SF
Position the frame as desired.
P
osition the frame using t
ouch controls or the arrow pad
(FGHI).
To re-center the frame, press and hold the OK button.
O
Image Aspect Choose a setting using the front or rear dial.
s
S-OVF
Press the button to turn the feature on or off.
PEAK
Peaking
You can choose the options displayed. gCCustom Menu
i> [Multi Function Settings]
(P. 279)
During shooting, [Highlight& Shadow Control] can also be set by pressing the F (exposure
compensation) button followed by the INFO button.
Adjusting Zoom During Filming (Movie A)
You can zoom in on a selected area of the frame for movie recording without using lens controls. Use
for instant close-ups or cuts to wider angles. Buttons or touch controls can be used to choose the
zoom location and cut to close ups or wide angles during filming.
[Movie A] is a [nButton Function] option. It turns on or off with a button and so must be
assigned to a control using [nButton Function]. g“Customizable Controls” (P. 167)
This feature is not available when [4K] or [C4K] is selected for [nX]> [Movie Resolution].
This feature cannot be used to film high-speed movies.
This feature cannot be combined with [Digital Tele-converter] (P. 208).
Using [Movie A]
177
Assigning functions to buttons (Button Function)
B
1.
2.