Option Description
gImage
Stabilizer
Choose whether the camera prioritizes frame rat
e or image stabilization during
burst phot
ography.
[gImage Stabilizer] is fixed at [Fps Priority] in u (Pro Capture Low)
and t (Pro Capture High) modes.
[Fps Priority]: Shooting speed gets priority over image stabilization. The
sensor will not be reset to the center during sequential shooting.
[IS Priority]: Image stabilization gets priority over shooting speed. The sensor
will be reset to the center per frame of sequential shooting. The shooting
speed will drop slightly.
Half Way Rls
With IS
When set to [Off
], the IS (Image S
tabilization) function while the shutter button
is pressed halfway will not be activated.
Lens I.S. Priority
Select [On] to give priority to lens on-board image stabilization when shooting
with third-party lenses. [S-IS1] will be used when [S-IS AUTO] is selected for
[KImage Stabilizer] (P. 134).
This option has no effect on lenses that are equipped with an image
stabilization switch.
278
gh Release/g/Image Stabilizer
C
C