You can choose the functions performed by the front and rear dials. g“Assigning R
oles to the
Front and Rear Dials (KDial Function)” (P. 319)
You can use the Fn lever to reverse the roles of the front and rear dials. The lever can also be
assigned other roles. g“Customizing the Fn Lever (KFn Lever Function)” (P. 321)
You can choose whether the display reflects the effects of exposure compensation or maintains
a constant brightness for ease of viewing. At default settings, the display reflects the effects of
exposure compensation. gCCustom Menu j> [Live View Boost] (P. 280)
Depending on the shutter speed selected, you may notice banding in the display caused by flicker
from fluorescent or LED light sources. The camera can be configured to reduce the effects of flicker
during live view or when pictures are taken. g“Reducing Flicker in Photographs (Anti-Flicker
Shooting)” (P. 327), “Reducing Flicker Under LED Lighting (KFlicker Scan)” (P. 343)
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure with [AUTO] selected for [KISO], the ISO
sensitivity display will flash as shown.
Display Problem/solution
Overexposure.
Choose a higher apertur
e value or faster shutter speed.
Underexposure.
Choose a lower aper
ture value or slower shutter speed.
If the warning does not clear from the display, choose a higher value for ISO
sensitivity. g“Changing ISO sensitivity (ISO)” (P. 98), CCustom Menu
m[KISO-Auto Set]> [Upper Limit / Default] (P. 284)
56
Choosing aperture and shutter speed (M: Manual
Exposur
e)
B
B
B
B
To Next Page
Loading...
