OM SYSTEM OM-5 - Page 314

Highlight [Creat
e Lens Data Set] and press the OK button.
Back Set
Data List
Create Lens Data Set
Use the FGHI buttons to choose an area of the frame and
then press the OK button.
50-200 F2.8-3.5 (S/N xxxxxxxxx)
±00
±00
±0
±0
±0
±0
±00
±00
±0
±0
±0
±0
±00
±00
±00
±00
±0
±0
±00
±00
±00
±00
±0
±0
±0
±0
±00
±00
±0
±0
±0
±0
±00
±00
±00
±00
±0
±0
±00
±00
±0
±0
±00
±00
±00
±00
±0
±0
±00
±00
Tele
Wide
Back Set
To fine-tune focus for the same lens but in a different area
of the frame, highlight the lens name using the FG
buttons
and press the I button.
1 50-200 F2.8-3.5
Data List
Create Lens Data Set
Back Set
You will be prompted to choose the area of the frame for which focus will be fine-tuned.
With zoom lenses, you can pr
ess the INFO button to choose between long (telephoto) and
short (wide) focal lengths.
Choose a fine-tuning value using the FG buttons and press the OK button.
The selected value will be saved. If you chose [Default Data], the options shown in Step2
will be displayed.
If you chose [Lens Data], the dialog shown in Step3 will be displayed. The display will show
the name of the lens for which the fine-tuning value was saved.
Rotate the front dial to zoom in and check focus.
Before pressing the OK button, press the shutter button to take a test shot and check focus.
To save another fine-tuning value for the current lens, press the I button and repeat the
process from Step4.
Repeat the process from Step4.
When the process is complete, press the MENU button repeatedly to exit the menus.
314
Fine-Tuning Autofocus (AF Focus Adj.)
3.
4.
5.
6.
7.