OM SYSTEM OM-5 - Page 378

When a message is displaying
stating that pairing is in
pr
ogress, rotate the mode
dial on the remote control to
CONNECT and keep it in this
position.
Pairing in progress.
Pleas
e perform pairing operation
on the wireless shutter release.
Wireless Shutter Setting
r
Cancel
When a message indicating pairing is complete is displayed,
press the
OK button.
Pairing is complete.
Bluetooth setting i
s changed to Onr.
Wireless Shutter Setting
Close
r
AA:BB:CC:DD:EE:FF
Pairing starts when it is kept 3seconds. Keep it in the CONNECT position until p
airing is
complete. If you rotate the mode dial before it is complete, the data transfer indicator flashes
rapidly.
The data transfer indicator lights when pairing starts.
The data transfer indicator goes out when pairing is complete.
[Bluetooth] (P. 361) will automatically be set to [Onr] when pairing is complete.
If you rotate the mode dial of the remote control or press the MENU button of the camera
before the pairing completion message is displayed, the pairing process ends. Paired device
information will be reset. Perform pairing again.
If you rotate the mode dial of a remote control that is not currently paired to CONNECT and
keep it 3seconds, or when pairing fails, the pairing information from previous connections
will be reset. Perform pairing again.
378
Connection
4.
5.
C
C