OM SYSTEM OM-5 - Page 93

Select a group of 25 targets, arranged in a square. The camera
chooses the target used for focus fr
om within the selected group.
s
The camera chooses the target used for focus from all available
tar
gets.
The camera chooses fr
om 121 (11 × 11) targets during still
photography and from 99 (11 × 9) targets in movie mode.
q
s 25-Target Group (5× 5)
q All T
argets
u/v/w/xCustom Target
Custom target modes can be displayed by going to [KYMode Settings] in CCustom
Menub (P. 271) and placing checks (P) next to the desired options.
The camera uses the AF target mode selected for [tTarget Mode Settings] in CCustom
Menub (P. 271). The default setting is single target.
Separate AF target modes can be selected according to camera orientation. gCCustom
Menub> [KOrientation Linked Y] (P. 310)
The following focus settings can be recalled simultaneously using the Fn lever. Separate settings can
be assigned to Positions 1 and 2. Use this option to quickly adjust settings according to shooting
conditions.
[AF Mode] (P. 118), [AF Target Mode] (P. 91), and [AF Target Point] (P. 95)
The Fn lever can be configured using the [KFn Lever Function] item in CCustom
MenuB (P. 321) or the [nButton/Dial/Lever]> [nFn Lever Function] item in the nVideo
Menu (P. 233).
You can adjust AF target settings for [C‑AF]. gCCustom Menua> [KC-AF Center
Start] (P. 303) and [KC-AF Center Priority] (P. 304)
Separate options can be selected for still photography and movie mode.
The number of AF targets available may be reduced depending on shooting settings.
93
Choosing an AF Target Mode (AF Target Mode)
B
B
-
B
B
B