Omron SYSMAC FH Series

WWW.NNC.IR
Operation log input information list
872
Vision System FH/FZ5 Series
User’s Manual (Z340)
Getting Security Related Parameters
GetSecurityParameter
Parameters
Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
Executing I/O Initialization
IoInitialize
Parameters
Return value
If the specified I/O is initialized successfully, returns 0.
If initialization failed, returns value other than 0.
Loading Security Related Settings
LoadSecurityData
Parameters
Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
_userName User name executed
_password User password executed
dataIdent
Data identifier name
userLoginTimeout: Login timeout time (minutes)
data Acquisition data storage variable
ioIdent
Initializing I/O module identifier name
• ParallelIo: Parallel I/O
• SerialNormal: Serial non-procedure communication
• UdpNormal: Ethernet UDP non-protocol communication
_userName User name executed
_password User password executed
fileName
Data identifier name
userLoginTimeout: Login timeout time (minutes)
data Path for ID to load