Panasonic FP0R - Page 300

15-38
FP0R (A: Available, N/A: Not available)
Address Name Description
Read-
ing
Writ-
ing
DT90420
Elapsed value
area
Lower words
PLS-
CH2
Available for the transistor
output type only.
Note) When controlling the
pulse output CH by
F166(HC1S), F167(HC1R)
instructions, the target
value is stored.
The target value for match
ON/OFF is stored.
A A
DT90421 Higher words A A
DT90422
Target value
area
Lower words A N/A
DT90423 Higher words A N/A
DT90424
Target value
area for match
ON/OFF
Lower words A N/A
DT90425 Higher words A N/A
DT90426
Corrected
speed of initial
speed
Lower words
The initial speed of the
calculated result is stored. A N/A
DT90427
Deceleration
minimum
speed
The minimum speed for the
change of speed. A N/A
DT90428
Acceleration
forbidden area
starting
position
Lower words
If the elapsed value corsses
over this position when
changing the speed,
acceleration cannot be
performed.
A N/A
DT90429 Higher words A N/A
DT90430
Elapsed value
area
Lower words
PLS-
CH3
Available for the transistor
output type only.
Note) When controlling the
pulse output CH by
F166(HC1S), F167(HC1R)
instructions, the target
value is stored.
The target value for match
ON/OFF is stored.
A A
DT90431 Higher words A A
DT90432
Target value
area
Lower words A N/A
DT90433 Higher words A N/A
DT90434
Target value
area for match
ON/OFF
Lower words A N/A
DT90435 Higher words A N/A
DT90436
Corrected
speed of initial
speed
Lower words
The initial speed of the
calculated result is stored. A N/A
DT90437
Deceleration
minimum
speed
The minimum speed for the
change of speed. A N/A
DT90438
Acceleration
forbidden area
starting
position
Lower words
If the elapsed value corsses
over this position when
changing the speed,
acceleration cannot be
performed.
A N/A
DT90439 Higher words A N/A