R&S FSV3000 Series - Page 1000

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1000User Manual 1178.8520.02 ─ 01
●
CALCulate<n>:MARKer<m>:FUNCtion:BPOWer:RESult? on page 1020
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult? on page 1025
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency? on page 1024
●
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:QFACtor? on page 1025
●
CALCulate<n>:MARKer<m>:COUNt:FREQuency? on page 1028
Remote commands exclusive to retrieving marker results
CALCulate<n>:DELTamarker<m>:X:RELative?............................................................... 1000
CALCulate<n>:DELTamarker<m>:Y............................................................................... 1000
CALCulate<n>:MARKer<m>:Y...................................................................................... 1000
CALCulate<n>:DELTamarker<m>:X:RELative?
This command queries the relative position of a delta marker on the x-axis.
If necessary, the command activates the delta marker first.
Suffix:
<n>
.
Window
<m> Marker
Return values:
<Position> Position of the delta marker in relation to the reference marker.
Example:
CALC:DELT3:X:REL?
Outputs the frequency of delta marker 3 relative to marker 1 or
relative to the reference position.
Usage: Query only
Manual operation: See " Marker 1 / Marker 2 / Marker 3 / Marker 4 " on page 298
See " Marker 1 / Marker 2 / Marker 3 " on page 303
CALCulate<n>:DELTamarker<m>:Y
Suffix:
<n>
.
1..n
<m> 1..n
Return values:
<Result> Result at the position of the delta marker.
The unit is variable and depends on the one you have currently
set.
Default unit: DBM
CALCulate<n>:MARKer<m>:Y
Suffix:
<n>
.
1..n
<m> 1..n
Analyzing Measurements (Basics)