Messages Description
Error: Ethernet Board An Ethernet board error has occurred.
Error: HDD Board A hard disk drive board error has occurred.
Error: Media Link Board An error has occurred on the File Format Converter.
Error: Memory Switch A memory switch error has occurred.
Error: Optional Font An error has occurred in the font file of the machine.
Error: Optional RAM An error has occurred in the optional memory unit.
Error: Parallel I/F Board An error has occurred in the parallel interface.
Error: PDL An error has occurred in the page description
language.
Error: Rem. Certificate Renewal An error has occurred in the remote server renewal.
Error: USB Board An error has occurred in the USB interface board.
Error: USB Interface An error has occurred in the USB interface.
Error: Wireless Board An error has occurred in the wireless interface
board or IEEE 802.11 interface unit.
Error: Wireless Card Wireless card is not inserted during start up, or the
IEEE 802.11 interface unit or the wireless card is
taken out after start up.
Exceed Booklet Stapling Limit The printing has exceeded the stapling limit of the
booklet finisher.
Exceed Stapling Limit The printing has exceeded the stapling limit.
Full: Finisher Finisher tray is full.
Full: Finisher Booklet Tray Booklet tray of Finisher is full.
Full: Finisher Shift Tray Shift tray of Finisher is full.
Full: Finisher Shift Tray 1, 2 The shift tray 1 and 2 of Finisher are full.
Full: Finisher Upper Tray Finisher's upper tray is full.
Full: Hole Punch Receptacle Punch Chip receptacle for hole punch is full.
Full: Internal Shift Tray The internal shift tray is full.
4. Monitoring and Configuring the Printer
208
To Next Page
Loading...
Need help?
General
