Messages Description
Full: Log Data Capacity The log data capacity is full.
Full: Waste Toner The waste toner is full.
Hex Dump Mode It is a hex dump mode.
Immed. Trans. not connected It did not connect directly with the other party of the
transmission.
Immediate Transmission Failed An error has occurred while transmitting directly.
In Use: Copier The copier is being used.
In Use: Fax The fax is being used.
In Use: Finisher Other functions is using Finisher.
In Use: Input Tray Other functions is using the input tray.
In Use: Staple Unit Other functions is using the staple unit.
Independent-supplier Toner Toner that is not recommended is set.
Jobs Suspended All jobs are suspended.
Key Card not inserted The machine is waiting for key card to be inserted.
Key Card/Counter not inserted The machine is waiting for key card or key counter
to be inserted.
Key Counter not inserted The machine is waiting for key counter to be left in
it.
Loading Toner... Toner is being supplied.
Log Data Transfer failed Log transfer has failed.
Low: Black Toner The black toner cartridge is not set correctly, or
toner is almost running out.
Low: Cyan Toner The cyan toner cartridge is not set correctly, or toner
is almost running out.
Low: Magenta Toner The magenta toner cartridge is not set correctly, or
toner is almost running out.
Getting Printer Information over the Network
209
To Next Page
Loading...
Need help?
General
