Installing Internet Information Services (IIS) and Certificate services
Specify this setting if you want the machine to automatically obtain e-mail addresses registered in Active
Directory.
We recommend you install Internet Information Services (IIS) and Certificate services as the Windows
components.
Install the components, and then create the server certificate.
If they are not installed, install them as follows:
1. Select [Add/Remove Programs] on the Control Panel.
2. Select [Add/Remove Windows Components].
3. Select the "Internet Information Services (IIS)" check box.
4. Select the "Certificate Services" check box, and then click [Next].
5. Installation of the selected Windows components starts, and a warning message appears.
6. Click [Yes].
7. Click [Next].
8. Select the "Certificate Authority", and then click [Next].
On the displayed screen, "Enterprise root CA" is selected.
9. Enter the Certificate Authority name (optional) in "CA Identifying Information", and then
click [Next].
10. Leave "Data Storage Location" at its default, and then click [Next].
Internet Information Services and Certificate services are installed.
Creating the Server Certificate
After installing Internet Information Services (IIS) and Certificate services Windows components, create the
Server Certificate as follows:
1. Start Internet Services Manager.
2. Right-click [Default Web Site], and then click [Properties].
3. On the "Directory Security" tab, click [Server Certificate].
Web Server Certificate Wizard starts.
4. Click [Next].
5. Select [Create a new certificate], and then click [Next].
6. Select [Prepare the request now, but send it later], and then click [Next].
7. Enter the required information according to the instructions given by Web Server Certificate
Wizard.
3. Users/Authentication and its Application
62
To Next Page
Loading...
Need help?
General
