Ricoh D065 - Page 489

Service Call Conditions
D062/D063/D065/D066 3-44 SM Appendix
Folding unit bottom fence lift motor
765 B
The 1st detection failure issues a
jam error, and the 2nd failure
issues this SC code.
 Motor harness disconnected, loose,
defective
 Motor defective
Clamp roller retraction motor error
766 B
The 1st detection failure issues a
jam error, and the 2nd failure
issues this SC code.
 Motor harness disconnected, loose,
defective
 Motor defective
Stack junction gate motor error
767 B
Occurs during operation of the
punch unit. The 1st detection
failure issues a jam error, and the
2nd failure issues this SC code.
 Motor harness disconnected, loose,
defective
 Motor overload
 Motor defective
Cover interposer tray bottom plate motor error
770 B
After the motor starts to raise the
bottom plate, the bottom plate
position sensor does not detect
the plate at the specified time (3
s).
After the motor starts to lower the
bottom plate, the bottom plate
HP sensor does not detect the
bottom plate.
 Bottom plate position sensor,
disconnected, defective
 Bottom plate HP sensor
disconnected, defective