EasyManua.ls Logo

Risco ProSYS Plus - Page 113

Risco ProSYS Plus
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
/
2017 Page 113 5IN2413 B
Quick keys Parameter Default Range
ZZZ

Key Switch Arm
This zone is used by financial institutions such as cash distribution centers
and banks to control the arming of the vault door or treasury department
entrance.
Use this zone for instant arming of the partition in which the zone is
allocated. This zone cannot perform disarming operation.
ZZZ

Key Switch Delayed Arm
Same as the Key Switch Arm type (see above), but the arming will be
delayed following exit delayed time.
Zones Parameters By Category Sound
Quick keys Parameter Default Range

Sound
This menu enables you to program the sound produced when a systems
zone triggers and alarm. Reporting to the central station is not affected by
the option of this menu.
The following sound can be selected:
Silent: Produces no sound
Bell Only: Activates the bell sounders for the duration of the Bell
Timeout period, or until a User Code is entered
Buzzer Only: Activates each keypad's internal piezo buzzer
Bell + Buzzer: Activates the bell sounders and the keypads' buzzers
simultaneously
Door Chime: The Door Chime parameter is used as an audible
sounder to indicate the violation of a zone(s), as follows:
o If the system is disarmed, the system's keypad buzzers make three
momentary sounds whenever the zone is violated.
o If the system is armed, only the bell sounders produce the alarm.
A different sound can be defined according to the system status as follows

At Arm
Set the sound produced when a system's zone triggers an alarm while the
system is fully (Away) armed.

Table of Contents

Other manuals for Risco ProSYS Plus

Related product manuals