Risco ProSYS Plus - Page 154

11
/
2017 Page 154 5IN2413 B
The use of these time periods depends on the reporting order to the MS
defined by the Report Split MS Urgent parameter. See:

(Communication  MS  Report Split).
The following table describes how the three MSs use the primary,
secondary and backup time intervals in the various MS report split options.
MS report Urgent
events
MS 1
Polling
State
MS 2
Polling
State
MS 3
Polling
State
Do not call N/A N/A N/A
Call 1
st
Primary N/A N/A
Call 2
nd
N/A Primary N/A
Call 3
rd
N/A N/A Primary
Call All Primary Primary Primary
1
st
Backup 2
nd
Primary If (MS 1 is
OK)
Secondary
else (MS#1
Fails)
Backup
N/A
1
st
Backup 2
nd
3rd Primary If (MS#1 is
OK)
Secondary
else (MS#1
Fails)
Backup
If (MS#2 is OK)
Secondary
else (MS#2 Fails)
Backup
1
st
Backup 3
rd
Call 2
nd
Primary Primary
If (MS#1 is OK)
Secondary
else (MS#1 Fails)
Backup
2
nd
Backup 3
rd
Call 1
st
Primary Primary
If (MS#2 is OK)
Secondary
else (MS#2 Fails)
Backup