11
2017 Page 168 5IN2413 B
Communication Monitoring Station Controls
Quick Keys Parameter Default Range
Controls
Programmable controls related to communication between the
system and the monitoring station
Call Save
No
Yes/No
YES: For reducing MS traffic congestion, the system holds all non-
urgent events (for example, opening/closing reports, test
transmissions) for up to 12 hours (programmable) and sends them as
a batch at a less busy time, for example, at night (see
Periodic Test,
page 171).
NO: All events are transmitted as they occur.
Show Kissoff
No
Yes/No
YES: The keypad indicates when the dialer receives the kissoff signal
from the MS’s receiver.
NO: The keypad does not indicate on receipt of the kissoff signal.
Show Handshake
No
Yes/No
YES: The keypad indicates when the dialer receives the handshake
signal from the monitoring station’s receiver.
NO: No indication for establishing communication with the MS’s
receiver
Audible Kissoff
No
Yes/No
YES: There is an audible sound emitted from the keypad when the
dialer receives the kissoff signal from the monitoring station’s
receiver.
NO: There is no audible sound on receipt of the kissoff signal.
SIA Text
No
Yes/No
Yes: SIA format report to monitoring station will support text
transmission over the voice channel.
Note
The monitoring station receiver should support the SIA Text protocol
No: SIA format will not support text
To Next Page
Loading...
