Troubleshooting
When a Message Displays
266
C00-000:Consumable Errors (in alphabetical order)
D00-000:Installation Error (in alphabetical order)
Message Possible Cause Action
Load Paper in
Standard Feed Tray
No printing paper in the Paper
Feed Tray.
Load paper into the Paper Feed Tray.
)p.33
Master Disposal Box 1 is Full
Empty Master Disposal Box
The Master Disposal Box is full. Empty the Master Disposal Box.
)p.248
Install a new Master Roll.
Master Disposal Box 2 is Full
Empty Master Disposal Box
No Ink in Print Drum 1
Replace Ink Cartridge
The ink is depleted. Replace and install a new Ink Cartridge.
Use the Ink Cartridge specifically
designed and approved for use with this
machine
)p.246
Important!:
• If the error persists after replacing the
Ink Cartridge, check for proper
installation of the Ink Cartridge.
No Ink in Print Drum 2
Replace Ink Cartridge
No Master
Replace Master Roll
The Master Roll is depleted. Install a new Master Roll.
Use Master Roll specifically designed and
approved for use with this machine
)p.243
Message Possible Cause Action
Close Front Cover The Front Cover is open or
improperly closed.
Check for the magnet underneath the
Front Cover and firmly close.
Close Master Making Unit Cover The Master Making Unit Cover
is open or is improperly
installed.
Pull out the Master Making Unit, check
and firmly close its cover.
Close the ADF Cover Optional Auto Document
Feeder DX-1 cover is open or
incorrectly set.
Check the ADF Cover and close it firmly.
Install Ink Cartridge
in Print Drum 1
The Ink Cartridge is improperly
installed or is missing.
Properly install the Ink Cartridge.
)p.246
Install Ink Cartridge
in Print Drum 2
Master Making Unit has been
Unlocked
The Master Making Unit is
ready to be pulled out.
Pull out the Master Making Unit.
Print Drum 1 has been Unlocked The Print Drum is ready to be
pulled out.
Pull out the Print Drum.
Print Drum 2 has been Unlocked
To Next Page
