Riso MZ970 - Page 280

Troubleshooting
When a Message Displays
277
Printing is Not Available
for This Setting with
Print Drum 2
Set Print Drum to be Used in
Drum Position 1 and
Re-select Printing Mode
Drum 2 may be used for single colour
printing, but certain limitations apply.
Current settings do not support single
colour printing with Drum 2.
Touch [Close].
Remove Drum 2 from its current
position, and replace it in place of
Drum 1.
Processing Other Operation
Retry after a while
Colour separation cannot be performed
while system is busy processing another
operation.
Please wait until the current operation is
completed.
Processing Print Data
from PC
Scanning Mode is Not
Available while Process-
ing Current Data
The machine is receiving the document
data from the computer.
While the data is being transmitted, Link
Mode printing and Scan mode are
disabled.
Touch [Close].
Initiate the Print job after the
transmission is complete, or print from
the machine.
Processing Print Data
from PC
This Function is Not
Available while Process-
ing Current Data
! Scanning is Not Possible !
External CI is not Connected
or Processing Connection
Check Cable Connection
(Symptom)
The scanning function is unavailable
due to a lost connection with an external
controller or because connection
processing has not finished.
(Action)
Check the connection with the external
controller.
Touch [Close].
(Alternatively, press the key or the
key to clear.)
Starting Up RISORINC-NET
Please Wait a Moment
RISORINC-NET is starting up. Touch [Close].
(Alternatively, press the key or the
key to clear.)
Please wait a moment.
Alternatively, print from the machine.
!! Unmatched Colour --
Data Colour and
Drum Colour 1 !!
Change Print Drum
The colour of the drum is different from
the colour specified on printer driver.
• To ignore printer driver setting and to
print with the colour currently installed
on the drum, touch [Continue].
• To change colour, touch [Cancel]
and replace drum.
!! Unmatched Colour --
Data Colour and
Drum Colour 2 !!
Change Print Drum
!! Unmatched Colour --
Data Colour and
Drum Colours !!
Change Print Drums
Message Symptom Action