Manual Operation
R&S
®
SMBV100A
93Operating Manual 1407.6062.32 ─ 08
2. To access a loadable data file, select the "Select/New" or "File Manager" function in
the individual dialog.
3. To access the "File Manager" function, press the SETUP (CTRL+E) key and select
"Save/Recall > File Manager".
A "File Select" window for loading, saving or creating a file or the "File Manager"
dialog for managing all files is displayed.
Saving and loading of all instrument settings
All instrument settings are saved and loaded in the "File" menu.
To access the "File" menu, press the FILE (CTRL+S) key.
For more information, see chapter 5.2.8, "Storing and Loading Instrument Data - File
Key", on page 138.
4.7.1 File Select Dialog
The "Save/Recall" dialaog displays the available drives and directories. In the upper part,
"Recent Data Sets", the files last used are listed.
The available drives and directories and the files of the selected directory are displayed.
The currently selected path is displayed above the window. Only the relevant files without
file extensions are displayed. If the area is opened several times, the path last selected
is displayed. When a file is saved or created, its name is user-selectable; the extension
is assigned automatically and cannot be entered. The file is saved to the selected path.
In addition to the files saved by the user, some menus also offer files containing prede-
fined contents. These files are saved to a specific directory on system drive; for this rea-
son, this directory cannot be chosen from the "File Select" menu.
File Management
To Next Page
Loading...
