Rohde & Schwarz SMBV100A - Hcopy:file[:Name]:Auto:directory:clear; Hcopy:file[:Name]:Auto:file; Hcopy:file[:Name]:Auto[:File]:Day

Remote Control Commands
R&S
®
SMBV100A
468Operating Manual 1407.6062.32 ─ 08
Example:
HCOP:FILE:AUTO:DIR '/usb/HCopy'
defines the destination directory '/usb/HCopy'
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar
This command deletes all files with extensions "bmp", "img", "png" and "xpm" in the
directory set for automatic naming.
Example:
HCOP:FILE:AUTO:DIR:CLE
deletes all image files with extensions "bmp", "img", "png" and
"xpm".
Usage: Event
:HCOPy:FILE[:NAME]:AUTO:FILE?
This command queries the file name that what generated using the automatic naming
settings. By default the automatically generated file name is composed of:
<Prefix><YYYY><MM><DD><Number>.<Format>.
Each component can be deactivated/activated separately to individually design the file
name.
Return values:
<File> string
Example:
HCOP:DEV:LANG BMP
selects output format *.bmp.
HCOP:FILE:AUTO:DIR '/usb/HCopy'
defines the destination directory '/usb/HCopy'
HCOP:FILE:AUTO:PREF 'gen'
the file name starts with the prefix 'gen'. The usage of automatic
naming with prefix and date in the file name is preset (…:STAT
ON).
HCOP
triggers the generation of a hardcopy of the current trace.
HCOP:FILE:AUTO:FILE?
queries the file name
Response: 'gen101012008001.bmp'
Usage:
Query only
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY?
The command returns the day of the current system date which will be used in the file
name if automatic naming is activated.
Return values:
<Day> float
Example:
HCOP:FILE:AUTO:DAY?
returns the day in the date part of the automatic file name.
HCOPy Subsystem