Manual Operation
R&S
®
SMBV100A
76Operating Manual 1407.6062.32 ─ 08
Accessing the menu tree
► Press the MENU (CTRL+M) key to open the complete menu tree.
Calling the File, Setup or Hardcopy dialogs
► Use the FILE (CTRL+S), SETUP (CTRL+E) or HCOPY (CTRL+Y) keys to open the
respective dialog.
Minimizing an active menu
► Use the HIDE (CTRL+H) key to minimize an active menu.
It is displayed in the form of a Winbar button.
Automatically arranging displayed menus
► Press the REARR (CTRL+A) key to rearrange all open menus so that they overlap
as little as possible.
Activating the Windbar
► Use the WINBAR (CTRL+W) key to toggle the cursor between a button of the "Win-
bar" and the block diagram.
The button that was active last in the Winbar is highlighted.
Closing an active menu
► Press the CLOSE key to close an active menu.
Tip: If the cursor is at the highest menu level, you can also use the ESC key to close
the active menu.
Accessing the header area
► Press the FREQ (CTRL+F) and LEVEL (CTRL+L) keys to activate the "Frequency"
or "Level" entry fields in the header area.
Keyboard Shortcuts
Keyboard shortcuts (e.g. "Ctrl + D" for the displaying the block diagram in the foreground)
provide direct access to all utility dialogs of the instrument (see chapter 4.8, "Legend of
Front-Panel Controls", on page 98).
4.4 Setting Parameters
The R&S SMBV offers several and sometimes alternative possibilities for setting param-
eters. Operation is possible from the front panel, with the aid of a mouse and/or from a
PC keyboard.
Setting Parameters
To Next Page
Loading...
