Rohde & Schwarz SMBV100A - Remote Access Via Ultr@Vnc

Preparing for Use
R&S
®
SMBV100A
44Operating Manual 1407.6062.32 ─ 08
2.7.2 Remote Access via Ultr@VNC
Ultr@VNC is an application which can be used to access and control the instrument from
a remote computer through a LAN connection. The program is included in operating sys-
tem Linux/Unix. It is available as a free-of-charge download on the internet for operating
system Window XP (http://www.uvnc.com/download/index.html) and on the instrument's
CD-ROM.
Risk of Unauthorized Access
If the VNC application is enabled on the instrument, any user in the network who knows
the computer name and login data can access it. To prevent this, make sure that the VNC
server service on the instrument is disabled.
Setting up a VNC connection
1.
Connect the instrument and the remote computer to a LAN, see chapter 2.6.1, "Con-
necting the Instrument to the Network", on page 39.
2.
Install the Ultr@VNC application and enable it on the instrument.
3. In the ICF firewall, enable communication on the network via Ultr@VNC program.
4. Install the VNC Viewer on the remote computer with Windows operating system, see
"Installing the VNC Viewer on a Windows PC" on page 47.
Remote Access via an External Controller